PID Tutorial

PID (proportion, integral, derivative) is a feedback controlled used to move something to a position. The controller slows down as it approaches its target and will correct itself after overshoot occurs. It is a relatively simply controller and can be very consistent with tuning.

Example 1 - User Control

This code uses a function called set_lift to set the power of 2 lift motors in a single function call. After liftPID is created, in opcontrol() we set the target depending on button presses. To run the PID we have to run liftPID.compute(sensor value) repeatedly to make sure our subsystem gets to its target. We reset the lift encoder in initialize() to make sure the motor is starting at a known position.

pros::Motor l_lift(17);
pros::Motor r_lift(18);
void set_lift(int input) {
  l_lift = input;
  r_lift = input;
}
PID liftPID{0.45, 0, 0, 0, "Lift"};

void initialize() {
  l_lift.tare_position();
}

void opcontrol() {
  while (true) {
    if (master.get_digital(DIGITAL_L1)) {
      liftPID.set_target(500);
    }
    else if (master.get_digital(DIGITAL_L2)) {
      liftPID.set_target(0);
    }
    set_lift(liftPID.compute(l_lift.get_position()));

    pros::delay(ez::util::DELAY_TIME);
  }
}

Example 2 - Waiting in Autonomous

This code uses the previous example as a base.

We've added a new function called lift_auto(). This function takes in a target and locks the code in a while loop until the lift has reached its target. The autonomous routine will bring the lift up to 500, wait for 1 second, and then come back down to 0.

pros::Motor l_lift(17);
pros::Motor r_lift(18);
void set_lift(int input) {
  l_lift = input;
  r_lift = input;
}
PID liftPID{0.45, 0, 0, 0, "Lift"};

void lift_auto(double target) {
  liftPID.set_target(target);
  ez::exit_output exit = ez::RUNNING;
  while (liftPID.exit_condition({l_lift, r_lift}, true) == ez::RUNNING) {
    double output = liftPID.compute(l_lift.get_position());
    set_lift(output);
    pros::delay(ez::util::DELAY_TIME);
  }
  set_lift(0);
}

void initialize() {
  l_lift.tare_position();
  liftPID.set_exit_condition(80, 50, 300, 150, 500, 500);
}

void autonomous() {
  lift_auto(500);
  pros::delay(1000);
  lift_auto(0);
}

void opcontrol() {
  while (true) {
    if (master.get_digital(DIGITAL_L1)) {
      liftPID.set_target(500);
    }
    else if (master.get_digital(DIGITAL_L2)) {
      liftPID.set_target(0);
    }
    set_lift(liftPID.compute(l_lift.get_position()));

    pros::delay(ez::util::DELAY_TIME);
  }
}

Example 3 - Tasks

Example 2 has a problem of not being able to do other things while the lift is running because the code is locked. We can fix this with a task.

pros::Motor l_lift(17);
pros::Motor r_lift(18);
void set_lift(int input) {
  l_lift = input;
  r_lift = input;
}
PID liftPID{0.45, 0, 0, 0, "Lift"};


void lift_wait() {
  while (liftPID.exit_condition({l_lift, r_lift}, true) == ez::RUNNING) {
    pros::delay(ez::util::DELAY_TIME);
  }
}

void lift_task() {
  pros::delay(2000);
  while (true) {
    set_lift(liftPID.compute(l_lift.get_position()));

    pros::delay(ez::util::DELAY_TIME);
  }
}
pros::Task Lift_Task(lift_task);

void initialize() {
  l_lift.tare_position();
  liftPID.set_exit_condition(80, 50, 300, 150, 500, 500);
}

void autonomous() {
  liftPID.set_target(500);
  lift_wait();

  pros::delay(1000);

  liftPID.set_target(0);
  lift_wait();
}

void opcontrol() {
  while (true) {
    if (master.get_digital(DIGITAL_L1)) {
      liftPID.set_target(500);
    }
    else if (master.get_digital(DIGITAL_L2)) {
      liftPID.set_target(0);
    }

    pros::delay(ez::util::DELAY_TIME);
  }
}